Friday, December 28, 2012

Thank You


I hope everyone had a fabulous Christmas.  So, now that the presents are opened, it’s Thank You card time.


I went with a simple design because I made a set of Thank You cards from my son to use for the gifts he got from some of his students.  I used up some leftover Christmas design paper (The Paper Studio) along with the Thank You sentiment printed with my computer (font is Britannic Bold – size 28).  I used Spellbinders Nestabilites A2 Matting Basics B for the Thank You rectangle and Back to Basics Tags for the dark green back piece. I covered the seam between the two design papers with 3/8″ Hunter Green Grosgrain and I finished off the tag with a little piece of Natural Jute String from Really Reasonable Ribbon.
I was able to get some ribbon and trim on my cards and it still has a masculine feel.  This card would also be great for mailing because with this type of ribbon addition, the card remains very flat.
Another fabby CAS card from this very non-CAS girl! 
Here is the complete set.
Best part is that they went together really quickly once I had my design planned out.
Thanks so much for stopping by today.  Happy New Year everyone!
~ Bonnie ~


Monday, December 17, 2012

Grinch Pills and Santa Cookie Toppers


Hi everyone! 


I hope today finds you with a low stress level.  I know my stress levels have been soaring over the last week, but now most of my Christmas chores are done, so things are getting better.  🙂


I’ve been busy for the last week or so making some little Christmas goodies for my son Steve’s 5th grade class.  I like to do this for him and he says the kids love what I send, so I’m happy to supply some fun little gifts for his students.


Last year I made the class some little packs of Snowman Poop (made with white tic tacs) and they loved them.  Here is a photo of what I did last year.  Notice I couldn’t resist using a little Baker’s Twine from Really Reasonable Ribbon on them.  🙂



This design actually comes from Whimsie Doodles and it’s in their freebie section.  What a cute and easy little craft.  I encourage you to head over and pick up the file if you have not already done so.  There is even a video tutorial for making them.  Even if you don’t have time this year, you’ll be ready to roll for next year.  Take a look at the great digi images Melyssa offers while you are there.  I love her style and she offers so many freebies and tutorials.



So, this year I wanted to do something different.  Pinterest is a great place to find ideas and I found several different ‘Grinch Pills’ options.  I really wanted to do one with green tic tacs, but I could not find value packs of green tic tacs, so I had to go with m & m’s.



Isn’t that adorable?  Sadly I could not find any free files for the photo and poem printout for this type of favor in the right size and shape, but I was able to use the poem and a Grinch cartoon image I found online and merge them together to get what I wanted.  It was a bit of a chore because I’m not a wiz on photoshop elements by any stretch of the imagination, but I got it done.


Hopefully you will be able to save the image below and use it for your own projects. 

I have also included a quick tutorial below.


I used this Grinch image because it’s one of our favorite scenes in the movie.


Here is another option you can use:
  And here’s a finished pack using the alternate image.  I used a little longer zip loc bag and this one contains peanut m & m’s.

You can also google Grinch pictures and find a whole range of options you can select to make your own special topper if you have the software to edit it yourself.



I’m also sending a little Santa topped cookie pack for each child. 

Isn’t it cute! 


When the cookies are gone, Santa can become a Christmas decoration.  It doesn’t show too well in the photo, but I put a red eyelet at the top of Santa’s hat and looped some White Iridescent Metallic String through for  a hanger.  To make this I used my Silhouette Cameo and a file called Santa Treat Topper.  I

re-sized it for my needs and cut the pieces out and assembled them. 

Seriously ladies, if you don’t already own this machine, it should be on your Christmas list.  This is my favorite ‘big-girl toy’!!




Grinch Pills Tutorial


Supplies are shown below.  I printed the Grinch Pills image and poem above and cut it out at 1 7/8″ x 3-1/2″.  The green card stock is cut at 2″ x 3-5/8″ and the stripe card stock is cut at 3-3/4″ x 5″.

I used 3 x 3″ zip loc bags for my green m & m’s and the ribbon topper is a 10″ piece of scarlet red double-faced satin from Really Reasonable Ribbon.

Fold the card stock in half and on the fold edge measure down about 1/4″ and make two holes about 3/8″ apart and centered on the piece.  If you are going to be doing a large number of them, figure out where you want the holes and make a jig like I did above so you can just trace where the holes go on each piece.  Then punch your holes out.
Now get your 3/8″ Scarlet Double-Faced Satin (if you are just making one, use about 10″ of ribbon, if you are doing multiples, just work off of your long piece of ribbon to reduce waste).  Cut the end on an angle and thread down through the right side hole and back up through the hole on the left.
Now take the ribbon from the left and feed it down through the hole on the right side.  Take a moment to work the ribbon a bit so it lays the way you want it so it will eventually lay straight out on the right side.
Then bring the ribbon back up through the hole on the left.  You want to leave a little ‘poofiness’ in the center, so don’t pull the ribbon too tight.
Cut your ribbon at an angle on either side (or however you prefer it) and then I usually take a little micro glue dot (I’m not sure if you can see it below, but it’s near the end of the ribbon).  Then place the ribbon end where you want it and that’s where it will stay.
Now add the layered Grinch photo and poem to your piece and the topper is done.
Open it up and run a piece of double-sided tape along the inside of the back flap that’s about 2-3/4″ long. 
Press your bag of m& m’s to the tape.  I have my m & m’s in a 3 x 3″ zip loc baggie.
Then add another piece of double stick tape to the top and press the topper together.
And….. you’re done!  If anyone has any questions, let me know.  I’d be happy to help if I can.

Here is a photo of all the ones I made – 23 in all (okay, well, 24 Grinch pill packs and 23 Santas).  Right now his class is 20, but I like to send a couple extra just in case.  You never know when he’ll get a new student.

Here are some photos of all the goodies ready to ship off.

Fingers crossed that they travel quickly and safely!!

Thanks so much for stopping by and have a wonderful Christmas!

~ Bonnie ~

Saturday, December 15, 2012

Pretty Pink Headband

Hi everyone.  It’s time for another fun challenge over at the Really Reasonable Ribbon’s Ramblings Blog and this time the theme is ‘Anything Goes & Ribbon’. 
So, if you are finding any crafty time at all this close to Christmas, head on over and link your project up!

For this challenge, I’ve created a Pretty Pink Headband.  I’ve combined the two techniques I’ve shown you in video tutorials in the past to make this headband that any little girl will fall in love with.
  The new pretty silver edged double-faced satin gives it a little extra bling.

To make the headband I started with 3/8″ White Satin with Grosgrain Edge Ribbon and made a woven ribbon headband as shown in the video below.  I used a 1/2″ White Plastic Headband and two 60″ pieces of ribbon which I glued together in an x-pattern in the middle.

Now, you can also just wrap the headband with ribbon, but I think the woven ribbon headband gives it a really nice finished look.  Now I realize you can’t see this when it’s worn, but if you are making them to sell or to give as a gift, it’s just a little extra zing and once you get the hang of making woven ribbon headbands, you can make one in 10 minutes or less, so I say ‘Go for it’!



Here is my finished white woven ribbon headband that will serve as the base for my project.  This would actually be very nice as is for a First Communion outfit or even for a flower girl………

The delicate stitching on the Satin with Grosgrain Edge White Ribbon gives it a little something extra, right?



Next I made the military braid with 3/8″ Satin with Silver Metallic Edge in Pearl Pink, and Hot Pink.  This beautiful ribbon is available in 20 fun colors and works well for so many projects.  You’ll use about 60″ of each color, but to be safe, be sure you start with at least 2-yards of each.  For this project there is no need to cut off a certain length of ribbon.  Just work from whatever length you have.  That way there will be minimal waste.  Follow the direction in the video below and stop when you have the length you need to cover your headband from tip to tip.  There is a little give in the braid, so you can stop when you are a smidge short and stretch it to fit.



Here is my finished braid

Close up of the braid

Now I marked the center of the underside of the braid and the center of the top of the headband with a small pencil mark so I start right in the middle.

Lay down a small area of hot glue and adhere the braid to the headband lining up the marks and centering side to side.  There is a small overhand on each side of the headband which is fine.  You can see it in  the photos of my finished headband and the top and bottom of this post.
Continue to hot glue the braid to the headband until it’s all glued on.  Be sure to only apply a small amount of glue at a time so you can get the braid pressed on before the hot glue cools down.
And here’s your finished piece. 
So pretty and so easy!

Thanks for stopping by today.  I hope you’ll join in our ‘Anything Goes’ Challenge #62 over at the Really Reasonable Ribbon’s Ramblings Blog.  The challenge is open though 12/29 and one random participant will be selected to win a $10 gift certificate to Really Reasonable Ribbon.


Happy Holidays!


~ Bonnie ~